
"MyTuner's" Manual
(8 Nov, 2000)

The "MyTuner" software program allows you to change channels in Roger Wilco program without leaving the game you are in. The following information should help you install and modify the MyTuner program to fit your gaming needs. This has only been tested with Windows NT 4.0 and Windows 98, 98 Second Edition using Roger Wilco Mark 1c. With the MyTuner Program you can update the file Tuner.ini with up to 25 command lines of your choice.




HOW TO INSTALL THE  MyTuner PROGRAM:

1. To install MyTuner, extract all files from the MyTuner zip file to a temporary directory.
2. Then run the setup.exe program.

This will create a directory in your  "Program Files"  called  "MyTuner" .
Example:  C:\Program Files\MyTuner




HOW TO SETUP THE MyTuner IP's AND OTHER CHANNELS: 

When the setup.exe program has finished installing the MyTuner program you must do the following:
1. Open you Windows Explorer and go to the location where the program is installed. C:\Program Files\MyTuner
2. In the above directory path you will find the file named  "Tuner.ini". Double click on the file and open this file with the NOTEPAD program.
3. This is where you will need to input the IPs you want to use for Roger Wilco.

When you first open the file it will look like this:
 This is just the install Default and will not work. This file must have the IPs you want to use entered into it if you want it to work with RogerWilco.
1.	CTRL-Z=/join1 www.rogerwilco.com/redteam
2.	CTRL-X=/join1 www.rogerwilco.com/blueteam
3.	CTRL-C=/join1 www.rogerwilco.com/private secret
4.	CTRL-V=/join1 www.rogerwilco.com/yellowteam
5.	CTRL-B=/join1 www.rogerwilco.com/terrorist
6.	CTRL-N=/join1 www.rogerwilco.com/counter-terrorist
7.	CTRL-M=/join1 www.rogerwilco.com/chat
8.	SHIFT-Z=/leave
9.	CTRL-SHIFT-Z=/callsign DogBreath
10.	CTRL-NUMPAD2=/callsign MonkeyMeat
11.	F2=/key PAD_5
12.	SHIFT-F3=/clicks off
13.	SHIFT-F4=/volume 255
14.	SHIFT-F5=/volume 1
15.	SHIFT-F6=/priority high
16.	F3=/netspeed 48

Where you see "www.rogerwilco.com/redteam" on line 1 above, change this to the IP you want to use for CTRL Z command.
Example:  1.	CTRL-Z=/join1 100.123.254.158
Save the file once you have setup all the channels or commands you want to use. 





HOW TO USE THE MYTUNER PROGRAM:

Changing a Channel:
On line 1 above, if you first hold down the "Ctrl" button and then the "Z" button the RogerWilco channel would be changed while in the middles of a game. (same happens on line 1 - 7)
  Example:  CTRL-Z=/join1 www.rogerwilco.com/redteam

Leaving RogerWilco"
On line 8 of the example above lets you leave all channels on RogerWilco .
Example:  So if you hold down the SHIFT and then the Z button you will leave all channels.
 Example:  SHIFT-Z=/leave

Changing Your Name On RogerWilco:
On line 9 & 10 on the above example lets you change your game name in Roger Wilco. 
So if you hold down the CTRL-SHIFT Z buttons your RogerWilco name would be changed to DogBreath.
If you hold down the CTRL-NUMPAD2 buttons your RogerWilco name would be changed to MonkeyMeat.
 Examples: CTRL-SHIFT-Z=/callsign DogBreath 
 Examples: CTRL-NUMPAD2=/callsign MonkeyMeat

Your Transmit Key:
(Note: you may want to set this up in the Roger Wilco program not MyTuner)   
Line 11 is the key you have setup as your transmit key.
In the example this command would change the transmit key to the number 5 on your number keypad.   
 Examples: F2=/key PAD_5 
 *("F12" is the default transmit key  of Roger Wilco)*

Mike Clicks: 
(Note: you may want to set this up in the Roger Wilco program not MyTuner)   
Line 12 is the keys that will turn off the mike Clicks.
So if you hold down the SHIFT and the F3 button the mike clicks will turn off.
Examples: SHIFT-F3=/clicks off

Volume Control: 
(Note: you may want to set this up in the Roger Wilco program not MyTuner)   
Line 13 and 14 allow you to turn up the volume control up or down.
 Examples: SHIFT-F4=/volume 255
 Examples: SHIFT-F5=/volume 1

Priority Level:
(Note: you may want to set this up in the Roger Wilco program not MyTuner)   
Line 15 will set the CPU to high level.  If your computer is less than a Pentium II or Celeron class processor, do not use this setting in the MyTuner program. Change the setting in the Roger Wilco program to Use Less CPU.  
 Examples: SHIFT-F6=/priority high

Internet Connection Speed:
(Note: you may want to set this up in the Roger Wilco program not MyTuner)   
Line 16 will change the Internet connection speed to T1. 
 Examples: F3=/netspeed 48




HOW TO EDIT THE TUNER.INI FILE: 
Now you want to edit the Tuner.ini file by adding your RogerWilco IPs. 
(Note: The IPs used in this example are not real)

Example:

CTRL-Z=/join1 168.100.100.001
CTRL-X=/join1 168.100.100.002
CTRL-C=/join1 168.100.100.003
CTRL-V=/join1 168.100.100.004
CTRL-B=/join1 168.100.100.005
CTRL-N=/join1 168.100.100.006
CTRL-M=/join1 168.100.100.007
SHIFT-Z=/leave
CTRL-SHIFT-Z=/callsign DogBreath
CTRL-NUMPAD2=/callsign MonkeyMeat
F2=/key PAD_5
SHIFT-F3=/clicks off
SHIFT-F4=/volume 255
SHIFT-F5=/volume 1
SHIFT-F6=/priority high
F3=/netspeed 48 





HOW TO RUN THE MYTUNER PROGRAM:
1. First open the Roger Wilco program.
2. Now open the MyTuner Program. The window will open. 
3. The first time you open the MyTuner Program all of the settings will display.This program needs to be running for the MyTuner program to work.

The 3 boxes at the bottom of the window currently are only there to display debug information: They show the current status of the CTRL, SHIFT, and assigned keys.

The 4 boxes to the right (Channel, Hot Key, Roger Wilco Channel, Password) have no use at this time but might  in the future.

4. The first time you use one of the settings (CTRL Z) the display panel in the MyTuner program will change to that setting only. 
5. If you cant remember your settings print out the Tuner.ini file this will help you until you remember them.

 




ROGER WILCO:
For more information about setting up a Roger Wilco Base Station (RWBS) or installing the "Roger Wilco MARK 1c" client software  please go to www.rogerwilco.com .



=============================================================

"MyTuner" software (an add-on program for Roger Wilco)
 CREATED BY: [TiC-BC]Gadgetman  OF THE TiC MiGHTY CLAN

Visit the home page for "MyTuner" at:
http://angelfire.com/nt/tic7/rwswitcher.html

The MiGHTY TiC Clan's World HeadQuarters
www.ticclan.com
ticclan@bigfoot.com
""Friendly people are always welcome at the [TiC]'TALK is CHEAP' Clan""


The TiC Clan would like to thank [TiC]Gadgetman for taking time from his very busy schedule to write this software. We would also like to thank  the support from www.rogerwilco.com  ("tone"). We would like to say thank you to [TiC]The_Jester for taking time to write the "MyTuner Manual" and helping users. We would also like to thank the TESTERS  that have downloaded and tried "MyTuner" and given us their feedback.
THANK YOU GUYS !
Long live Roger Wilco !

All rights reserved TiC Clan .
(8 Nov, 2000)